Paper
14 July 2008 Lightweight optical segment prototype for adaptive optics manufactured by hot slumping
Author Affiliations +
Abstract
In the framework of the E-ELT Design Study financed by the European Community under OPTICON-FP6, the INAFAstronomical Observatory of Brera (INAF-OAB) has developed a technique for the manufacturing of thin optical segments. This study has the potential to fulfill the requirements of speed of production, contained costs and good optical quality for adaptive optics mirrors of the future. Following this approach these shells are produced by means of an hot slumping technique in which an initially flat thin BorofloatTM glass sheet is placed onto a high quality ceramic mold, used as a master, to impart a precise shape to the glass by means of a thermal cycle. The thickness of these shells is of about 1.7 mm, making the optical surface very floppy and easy to be deformed. A previous investigation made on small size segments (diam. 130 mm) has shown quite encouraging results. The final goal of this study is to produce a concave spherical mirror prototype of 500 mm diameter. In this paper we report the last results of this effort in scaling-up the procedure and related problems concerning the optical testing.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Canestrari, M. Ghigo, S. Basso, D. Spiga, and L. Proserpio "Lightweight optical segment prototype for adaptive optics manufactured by hot slumping", Proc. SPIE 7015, Adaptive Optics Systems, 70153S (14 July 2008); https://doi.org/10.1117/12.790396
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Optics manufacturing

Adaptive optics

Zerodur

Mirrors

Prototyping

Spherical lenses

Back to Top