Paper
19 May 2008 Comparison of verification methods for OASIS files: hierarchical or flat?
Author Affiliations +
Abstract
In order to go through the transition term from GDSII to OASIS successfully, the aid of the verification tools between OASIS and GDSII is necessary. In general, we have two methods of OASIS file verification. One is a hierarchical method that checks between GDSII and OASIS by each cell level. The other is a flat method that merges each pattern through its hierarchy into a flat level and compares the flattened geometry one by one. We did the experiments of comparison between two methods for OASIS to GDSII verification. The software tool called 'ogdiff' has been used for a hierarchical verification experiment. We used SmartMRC for the flat method experiment. In this paper, we show the experimental results of comparison and we also address the pros and cons of each method. Then we suggest which method is preferable for specific cases.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kokoro Kato, Yoshiyuki Taniguchi, Masakazu Endo, Kuninori Nishizawa, Tadao Inoue, and Toshiaki Fujii "Comparison of verification methods for OASIS files: hierarchical or flat?", Proc. SPIE 7028, Photomask and Next-Generation Lithography Mask Technology XV, 702834 (19 May 2008); https://doi.org/10.1117/12.793111
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Data conversion

Photomasks

Optical proximity correction

Parallel processing

Nanotechnology

Data modeling

Data processing

RELATED CONTENT

New mask data processing system for ULSI fabrication
Proceedings of SPIE (July 28 1997)
Effectiveness of mask data process using OASIS format
Proceedings of SPIE (June 28 2005)
GDSII considered harmful
Proceedings of SPIE (March 11 2002)

Back to Top