Paper
28 January 2009 Switching noise insensitive power module for infrared imaging system
Yong-quan An, Yan Zhao
Author Affiliations +
Abstract
Existing switching mode power supply solutions cause unacceptable self-pollution within the infrared imaging system. The band unlimited PWM signal will be coupled to the input of ADC, and then be sampled. High order harmonics are aliased down to the frequency band of the image signal. With the use of the digital PWM controller, the switching frequency can be precisely synchronized with the ADC sampling clock. The predominant parts of the noise signal will be down converted into the DC signals and eliminated by image processing units. The noise immunity principle was tested and proved on an infrared image capture system.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yong-quan An and Yan Zhao "Switching noise insensitive power module for infrared imaging system", Proc. SPIE 7156, 2008 International Conference on Optical Instruments and Technology: Optical Systems and Optoelectronic Instruments, 715631 (28 January 2009); https://doi.org/10.1117/12.811794
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Switching

Infrared imaging

Analog electronics

Clocks

Imaging systems

Power supplies

Field programmable gate arrays

RELATED CONTENT


Back to Top