Paper
25 August 2009 Mechanical properties and optical testing of metal honeycomb sandwich panel in MTPS
Jie Lu, Guang ping Zou, Jun Liang
Author Affiliations +
Proceedings Volume 7375, ICEM 2008: International Conference on Experimental Mechanics 2008; 737544 (2009) https://doi.org/10.1117/12.839279
Event: International Conference on Experimental Mechanics 2008 and Seventh Asian Conference on Experimental Mechanics, 2008, Nanjing, China
Abstract
Mechanical tests of a Co-based superalloy honeycomb thermal protection system (TPS) panel are finished at room temperature. The lateral tensile limit strength is higher than 59MPa and nearly four multiples of the flatwise compressive strength. Also the modulus in lateral tests are nearly two multiples of the ones under compressive loads. Because of many advantages in application, two optical non-contact methods are introduced in this work to solve different problems of honeycomb sandwich panels. Longitudinal strain of lateral tensile specimens is obtained by digital speckle correlation method (DSCM) and the results of different sub-pixel methods are constrasted. Then the equivalent elastic modulus is calculated further. Electronic speckle shearography pattern interferometry (ESSPI) is presented to obtain the nondestructive results of debonding defects between honeycomb cores and face sheets. Also the size and approximate location are decided real-time. All the results show the two introduced methods are feasible.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jie Lu, Guang ping Zou, and Jun Liang "Mechanical properties and optical testing of metal honeycomb sandwich panel in MTPS", Proc. SPIE 7375, ICEM 2008: International Conference on Experimental Mechanics 2008, 737544 (25 August 2009); https://doi.org/10.1117/12.839279
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Speckle

Interferometry

Shearography

CCD image sensors

Nondestructive evaluation

Speckle pattern

Calibration

Back to Top