Paper
21 August 2009 Improved diffraction-based overlay metrology by use of two dimensional array target
Author Affiliations +
Abstract
We report results of theoretical modeling into a scatterometry-based method relevant to overlay measurement. A set of two array targets were designed with intentional offsets difference, d and d+20 nm, between the top and bottom grid arrays along the X and Y directions. The correlation of bi-azimuth measurements is the first critical issue been taken into account. The method linearizes the differential values of scatterometry signatures at the first diffraction order with respect to designed offsets, and hence permits determination of overlay using a classical linear method. By evaluating the process variations (eg. CD, roundness and thickness) on overlay measurement error, a set of two overlay target design were optimized to minimize the correlation of bi-azimuth measurements and maximize the measurement sensitivity.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yi-Sha Ku, Hsiu-Lan Pang, Weite Hsu, and Deh-Ming Shyu "Improved diffraction-based overlay metrology by use of two dimensional array target", Proc. SPIE 7405, Instrumentation, Metrology, and Standards for Nanomanufacturing III, 74050C (21 August 2009); https://doi.org/10.1117/12.825524
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Overlay metrology

Diffraction

Scatterometry

Signal processing

Critical dimension metrology

Photoresist materials

Diffraction gratings

Back to Top