Paper
1 September 2009 A stitching method to test the segments of a large primary
Enoch Gutierrez-Herrera, Marija Strojnik, Gonzalo Paez, Paul Shore, Paul Morantz
Author Affiliations +
Abstract
The European Extremely Large Telescope will be a large optical/infrared telescope with a segmented primary mirror of 42-m diameter, and 84-m radius of curvature. Each segment, about 1.2-meters across, implies great manufacturing and measuring challenges. To determine the most adequate metrology technique for testing these segments, we report a brief comparative analysis of the four most important testing techniques used for large surfaces. The study shows that the stitching method is the most appropriate technique. We implement a proof of concept to demonstrate the viability of this technique for studying surfaces with a small curvature and estimate the challenges to overcome. The analysis confirms that the success of the stitching technique, in curved elements, ensues because the roughness does not contribute significantly to the surface tendency. Therefore, we propose the use of tendency information to solve Procrustes' problem and to improve the resultant shape of the unified map for surfaces with small curvature, as in the case of the segments of a large primary mirror.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Enoch Gutierrez-Herrera, Marija Strojnik, Gonzalo Paez, Paul Shore, and Paul Morantz "A stitching method to test the segments of a large primary", Proc. SPIE 7453, Infrared Spaceborne Remote Sensing and Instrumentation XVII, 74530U (1 September 2009); https://doi.org/10.1117/12.826765
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Optical components

Interferometers

Image processing

Matrices

Metrology

Stitching interferometry

RELATED CONTENT

In-process metrology for large astronomical mirrors
Proceedings of SPIE (November 01 1990)
Mirror metrology and bender characterization at ESRF
Proceedings of SPIE (September 16 2005)
Stylus profilometry of large optics
Proceedings of SPIE (November 01 1990)
Optical figure testing by scanning deflectometry
Proceedings of SPIE (September 06 1999)

Back to Top