Paper
27 May 2009 Residual-free imprint for sensor definition
A. Mayer, N. Bogdanski, S. Möllenbeck, H.-C. Scheer
Author Affiliations +
Proceedings Volume 7470, 25th European Mask and Lithography Conference; 74700K (2009) https://doi.org/10.1117/12.835182
Event: 25th European Mask and Lithography Conference, 2009, Dresden, Germany
Abstract
For the preparation of interdigitated sensor devices with nanometre sized electrodes a low-cost route is followed. The central technique used for electrode definition is nanoimprint. To imprint the larger contact areas as easy as the electrodes, the contacts are broken down into a grid. In order to end up with a highly uniform residual layer the concept of 'partial cavity filling' is utilised, resulting in an almost negligible layer thickness. The metallic electrodes are defined by sputtering and lift-off directly after imprint, where a previous etching of the residual layer is not required. The results show that the concept works. With this strategy, preparation of an interdigitated sensor requires nothing but spin-coating, nanoimprinting and sputtering/lift-off.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Mayer, N. Bogdanski, S. Möllenbeck, and H.-C. Scheer "Residual-free imprint for sensor definition", Proc. SPIE 7470, 25th European Mask and Lithography Conference, 74700K (27 May 2009); https://doi.org/10.1117/12.835182
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Sensors

Nanoimprint lithography

Etching

Metals

Sputter deposition

Silicon

RELATED CONTENT


Back to Top