Calibration in a potential water jet of a five-hole pressure probe with embedded sensors for unsteady flow measurement

P. Duquesne; C. Deschênes; M. Iliescu; G. D. Ciocan

doi:10.1117/12.851735

14 April 2010 Calibration in a potential water jet of a five-hole pressure probe with embedded sensors for unsteady flow measurement

P. Duquesne, C. Deschênes, M. Iliescu, G. D. Ciocan

Author Affiliations +

Proceedings Volume 7522, Fourth International Conference on Experimental Mechanics; 752217 (2010) https://doi.org/10.1117/12.851735
Event: Fourth International Conference on Experimental Mechanics, 2009, Singapore, Singapore

Abstract

Investigations of the flow behavior are currently carried out experimentally on models of hydraulic turbines. Quantities such as unsteady velocity can be acquired using PIV or LDV techniques, static wall pressure using steady or unsteady pressure transducers and wall shear stress using hot-film anemometry. More rarely acquired however, the unsteady total pressure at different locations in the flowstream would give more information on the flow dynamics and would be a key component for setting boundary conditions for CFD simulations. Following the example of classical Pitot tubes, which can only give averaged pressure values though, we have developed a five-hole pressure probe with embedded sensors that can measure unsteady values of total pressure, local flow velocity and direction. The probe head is designed to have a minimum impact on the flowstream, and the miniature sensors are placed in a cross configuration compared to the probe's support axis. This paper focuses on the utilization of normalized calibration coefficients and their use for unsteady values, and on the justification for using our cross sensor repartition. The calibration setup is presented briefly, including a water potential jet that requires the calculation of specific calibration coefficients. Different phenomena were observed during experimentation. Their impact on the accuracy of the probe is analyzed. The probe's operation range for this particular calibration setup is discussed. Finally, we focus on the influence of the sensors repartition on the tridimensional shape of the calibration coefficients, and we provide a way to calculate the first approximate solution for the reverse calculus while the sensors are not aligned with the probe's arm.

Citation Download Citation

P. Duquesne, C. Deschênes, M. Iliescu, and G. D. Ciocan "Calibration in a potential water jet of a five-hole pressure probe with embedded sensors for unsteady flow measurement", Proc. SPIE 7522, Fourth International Conference on Experimental Mechanics, 752217 (14 April 2010); https://doi.org/10.1117/12.851735

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available