Fabrication of a conformal ring-annular ultrasound array

Aaron E. Dann; David B. Bennett; Rahul S. Singh; Jean-Jacques Lemaire; Warren S. Grundfest; Martin O. Culjat

doi:10.1117/12.844634

12 March 2010 Fabrication of a conformal ring-annular ultrasound array

Aaron E. Dann, David B. Bennett, Rahul S. Singh, Jean-Jacques Lemaire, Warren S. Grundfest, Martin O. Culjat

Proceedings Volume 7629, Medical Imaging 2010: Ultrasonic Imaging, Tomography, and Therapy; 76290R (2010) https://doi.org/10.1117/12.844634
Event: SPIE Medical Imaging, 2010, San Diego, California, United States

Abstract

This paper presents the fabrication of a conformal, ring-annular ultrasound imaging array. Two-dimensional (2D) ultrasound scanning is possible with ring-annular array transducers in which a number of piezoelectric elements are arranged in a circle. The 2D scanning technique can be realized through time delays, potentially allowing for 3D imaging. Ring-annular array transducers have previously been shown to have increased bandwidth, better signal-to-noise, and uniform scanning in space in contrast to 2D matrix arrays of an equal number elements and aperture size. Conformal, ring-annular transducers have the ability to match the curvature of body surfaces, and have the additional advantage that the flexible array elements can be mechanically focused to provide enhanced focusing capabilities relative to rigid ring-annular arrays. The process developed for the fabrication of conformal, ring-annular ultrasound array is presented. A microfabrication approach is used to produce ring-annular arrays featuring flexible joints with high durability, and capable of scaling in size and element architectures. The fabrication process yields a ring of piezoelectric transducer elements held together with polyimide, which is the basis of the flexible joints that enable conformal ultrasonography. The described fabrication process is used to produce a ring-annular array with a single ring containing piezoelectric elements, but the process can be extended to form arrays with multiple annular-rings of varying sizes. The transducer had a fundamental thickness-mode resonant frequency of 12 MHz, a 6 dB bandwidth of 23%, and an acoustic pulse width of 1.8 μs in water.

Citation Download Citation

Aaron E. Dann, David B. Bennett, Rahul S. Singh, Jean-Jacques Lemaire, Warren S. Grundfest, and Martin O. Culjat "Fabrication of a conformal ring-annular ultrasound array", Proc. SPIE 7629, Medical Imaging 2010: Ultrasonic Imaging, Tomography, and Therapy, 76290R (12 March 2010); https://doi.org/10.1117/12.844634

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available