Paper
12 April 2010 Small-scale modular wind turbine
Scott Bressers, Chris Vernier, Jess Regan, Stephen Chappell, Mark Hotze, Stephen Luhman, Dragan Avirovik, Shashank Priya
Author Affiliations +
Abstract
This study reports the design, fabrication, and implementation of a horizontal-axis, small-scale modular wind turbine termed as "small-scale wind energy portable turbine (SWEPT)". Portability, efficient operation at low wind speeds, and cost-effectiveness were the primary goals of SWEPT. The fabrication and component design for SWEPT are provided along with the modifications that can provide improvement in performance. A comparative analysis is presented with the prototype reported in literature. The results show that current version of SWEPT leads to 150% increase in output power. It was found that SWEPT can generate 160 mW power at rated wind speed of 7 mph and 500mW power at wind speeds above 10 mph with a cut-in wind speed of 3.8 mph. Furthermore, the prototype was subjected to field testing in which the average output was measured to be 40 mW despite the average wind distribution being centered around 3 mph.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Scott Bressers, Chris Vernier, Jess Regan, Stephen Chappell, Mark Hotze, Stephen Luhman, Dragan Avirovik, and Shashank Priya "Small-scale modular wind turbine", Proc. SPIE 7643, Active and Passive Smart Structures and Integrated Systems 2010, 764333 (12 April 2010); https://doi.org/10.1117/12.847609
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prototyping

Wind turbine technology

Wind energy

Resistance

Computer aided design

Electromagnetism

Performance modeling

Back to Top