Design and fabrication of CGH for aspheric surface testing and its experimental comparison with null lens

Fazhi Li; Jingli Zhao; Ruigang Li; Binzhi Zhang; Ligong Zheng; Xuejun Zhang

doi:10.1117/12.867627

11 October 2010 Design and fabrication of CGH for aspheric surface testing and its experimental comparison with null lens

Fazhi Li, Jingli Zhao, Ruigang Li, Binzhi Zhang, Ligong Zheng, Xuejun Zhang

Author Affiliations +

Proceedings Volume 7656, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment; 765643 (2010) https://doi.org/10.1117/12.867627
Event: 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies, 2010, Dalian, China

Abstract

Computer-generated hologram (CGH) is an effective way to compensate wavefront in null test of aspheric surfaces and freeform surfaces. Our strategies of CGH design and fabrication for optical testing are presented, and an experiment demonstrating the compensation results of CGH and null lens is also reported. In order to design complex CGH, software was developed, with which we can design a CGH including three sections: main section for compensating wavefront in null test, alignment section for adjusting the relative position between CGH and interferometer, and fiducial section for projecting fiducial marks around the optics under test. The design result is represented in GDS II format file which could drive a laser-direct-writer-machine to fabricate a photomask. Then, a 1:1 replication process is applied to duplicate the patterns from photomask to a parallel optical substrate whose surface is error better than λ/60 rms. Finally, an off-axis aspheric surface was tested with CGH and null lens respectively. The test result with CGH (0.019λ;rms) is almost the same as the result with null lens (0.020λ rms). This experiment also demonstrated that fiducial marks projected by CGH can be used to guide the alignment of the optics and measurement of its off-axis distance.

Citation Download Citation

Fazhi Li, Jingli Zhao, Ruigang Li, Binzhi Zhang, Ligong Zheng, and Xuejun Zhang "Design and fabrication of CGH for aspheric surface testing and its experimental comparison with null lens", Proc. SPIE 7656, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 765643 (11 October 2010); https://doi.org/10.1117/12.867627

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available