Paper
3 May 2010 Mid-wavelength InAsSb detectors based on nBn design
Author Affiliations +
Abstract
The development of InAsSb detectors based on the nBn design for the mid-wave infrared (MWIR) spectral region is discussed. Comparisons of optical and electrical properties of InAsSb photodetectors with two different barrier material, namely, AlAs 0.15Sb0.75 (structure A) and AlAs0.10Sb0.9 (structure B) are reported. The dark current density in the AlAs0.15Sb0.85 is lower possibly due to the larger valence band offset. Clear room temperature spectral responses is observed and a specific detectivity (D*) of 1.4x1012 and 1.01x1012 cmHz1/2/W at 0.2 V, and a responsivity of 0.87 and 1.66 A/W under 0.2 V biasing at 77 K and 3.5 μm, assuming unity gain, was obtained for structures A and B, respectively.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Khoshakhlagh, S. Myers, E. Plis, M. N. Kutty, B. Klein, N. Gautam, H. Kim, E. P. G. Smith, D. Rhiger, S. M. Johnson, and S. Krishna "Mid-wavelength InAsSb detectors based on nBn design", Proc. SPIE 7660, Infrared Technology and Applications XXXVI, 76602Z (3 May 2010); https://doi.org/10.1117/12.850428
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Diffusion

Infrared sensors

Mid-IR

Temperature metrology

Infrared detectors

Gallium antimonide

Back to Top