Optical simulation of coupled defect cavities in photonic crystal vertical-cavity surface-emitting lasers

Péter Nyakas

doi:10.1117/12.853808

27 April 2010 Optical simulation of coupled defect cavities in photonic crystal vertical-cavity surface-emitting lasers

Péter Nyakas

Proceedings Volume 7720, Semiconductor Lasers and Laser Dynamics IV; 77201M (2010) https://doi.org/10.1117/12.853808
Event: SPIE Photonics Europe, 2010, Brussels, Belgium

Abstract

We simulated the cold-cavity optical modes of coupled defect cavities in photonic crystal (PhC) vertical-cavity surface-emitting lasers (VCSELs). Holes were etched into the top distributed Bragg reflector of the COST benchmark structure in hexagonal pattern, leaving 2×1 or 2×2 positions intact. A lattice constant of 4 μm was selected, the hole diameter-to-lattice-constant ratio was varied from 0.5 to 0.7 outside the defect region and from 0.15 to 0.7 between the cavities. We used finite volume method to discretize the scalar Helmholtz equation, and finite element method to solve the vectorial Helmholtz equation, both in three dimensions. Prism elements were selected that fit the complicated contours of the PhC-VCSEL. In-phase and out-of-phase couplings were specified with different symmetry boundary conditions. The complex eigenvalues and optical field distributions were obtained with an in-house developed iterative algorithm. The real part of the eigenvalue determined the wavelength, its imaginary part was proportional to the cold-cavity modal loss. In-phase and out-of-phase coupled modes possessed almost equal properties when all holes had relatively large diameters, indicating uncoupled behavior. For a narrower hole between the defect cavities, the in-phase coupled mode exhibited slightly larger mode area than its out-of-phase counterpart due to its extending tails, but also showed considerably larger optical loss. This predicted out-of-phase operation. If one etched very small holes into the coupling region of the 2×2 PhC-VCSEL array, an additional lobe appeared between the holes, which resulted in enhanced overlap with the gain region. This confirmed in-phase operation.

Citation Download Citation

Péter Nyakas "Optical simulation of coupled defect cavities in photonic crystal vertical-cavity surface-emitting lasers", Proc. SPIE 7720, Semiconductor Lasers and Laser Dynamics IV, 77201M (27 April 2010); https://doi.org/10.1117/12.853808

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available