Paper
29 July 2010 Platinum as a release layer for thermally formed optics for IXO
S. Romaine, R. Bruni, P. Gorenstein, S. Park, P. Reid, B. Ramsey, T. Kester
Author Affiliations +
Abstract
Platinum is being explored as an alternative to the sprayed boron nitride mandrel release coating under study at GSFC for the International X-ray Observatory (IXO). Two and three inch diameter, polished (PFS) and superpolished (SPFS) fused silica flat mandrels, were used for these tests. Pt was applied to the mandrels by DC magnetron sputtering. The substrate material was 400 micron thick D263 glass, the material which has been proposed for the IXO segmented optics. These substrates were placed on the mandrels and thermally cycled with the same thermal profile being used at GSFC in the development of the BN slumping for IXO. After the thermal cycle was complete, the D263 substrates were removed; new D263 substrates were placed on the mandrels and the process was repeated. Four thermal cycles have been completed to date. After initially coating the mandrels with Pt, no further conditioning was applied to the mandrels before or during the thermal cycles. The microroughness of the mandrels and of the D263 substrates was measured before and after thermal cycling. Atomic force microscopy (AFM) and 8 keV X-ray reflectivity data are presented.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Romaine, R. Bruni, P. Gorenstein, S. Park, P. Reid, B. Ramsey, and T. Kester "Platinum as a release layer for thermally formed optics for IXO", Proc. SPIE 7732, Space Telescopes and Instrumentation 2010: Ultraviolet to Gamma Ray, 77323T (29 July 2010); https://doi.org/10.1117/12.858109
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Platinum

Surface roughness

Coating

Glasses

X-rays

Reflectivity

Polishing

RELATED CONTENT

Lynx optics based on full monolithic shells design and...
Proceedings of SPIE (October 05 2018)
Forming an ultrathin and lightweight Wolter type 1 x ray...
Proceedings of SPIE (September 17 2018)
Reflectance Of X Ray Mirrors From 3.8 To 50 keV...
Proceedings of SPIE (May 03 1982)
Hard and soft x ray study of the correlation between...
Proceedings of SPIE (June 20 1995)
Development of EUVL mask blank in AGC
Proceedings of SPIE (October 20 2006)

Back to Top