On-orbit adjustment concepts for the Generation-X Observatory

Daniel A. Schwartz; Roger Brissenden; Mark Freeman; Terrance Gaetz; Paul Gorenstein; Diab Jerius; Michael Juda; Paul Reid; Scott Wolk; Timo Saha; William Zhang; Stephen O'Dell; Susan Trolier-McKinstry; Derek Wilke

doi:10.1117/12.862353

29 September 2010 On-orbit adjustment concepts for the Generation-X Observatory

Daniel A. Schwartz, Roger Brissenden, Mark Freeman, Terrance Gaetz, Paul Gorenstein, Diab Jerius, Michael Juda, Paul Reid, Scott Wolk, Timo Saha, William Zhang, Stephen O'Dell, Susan Trolier-McKinstry, Derek Wilke

Author Affiliations +

Proceedings Volume 7803, Adaptive X-Ray Optics; 78030J (2010) https://doi.org/10.1117/12.862353
Event: SPIE Optical Engineering + Applications, 2010, San Diego, California, United States

Abstract

Generation-X is required to be an X-ray observatory with 50 m2 effective collecting area and 0.1 arcsec half-power diameter (HPD) angular resolution at 1 keV. It is conceived that a launch vehicle such as that studied for the Ares V will carry a monolithic 16-m-diameter mirror to the earth-sun L2 point. Even with such a vehicle, the reflectors comprising the ≈ 250 nested shells must be extremely light-weight. Therefore their figure and alignment cannot be achieved on the ground, and likely could not be maintained through the launch environment. We will present a conceptual solution to those constraints: adjustable X-ray optics, as a case of "adaptive" optics where the stability once in orbit should require adjustments no more frequently than yearly. The figure would be adjusted via thin-film actuators deposited directly to the back (non-reflecting) side of each element. This bi-morph configuration would impart in-plane strains via the piezoelectric or electrostrictive effect. Requirements of the adjustment are to the order of a few nanometer precision. Each shell, and each module, must also be aligned, to tolerances of about 0.1 micrometer. We conceive that on-orbit data would be acquired by a built-in Hartmann system for the alignment adjustments and low-order figure, and by ring profile measurements of a very bright celestial X-ray source to correct figure errors up to the mid-frequency range of several hundredths cycles mm⁻¹.

Citation Download Citation

Daniel A. Schwartz, Roger Brissenden, Mark Freeman, Terrance Gaetz, Paul Gorenstein, Diab Jerius, Michael Juda, Paul Reid, Scott Wolk, Timo Saha, William Zhang, Stephen O'Dell, Susan Trolier-McKinstry, and Derek Wilke "On-orbit adjustment concepts for the Generation-X Observatory", Proc. SPIE 7803, Adaptive X-Ray Optics, 78030J (29 September 2010); https://doi.org/10.1117/12.862353

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available