Two dimensional scanning probe using off-axis magnetic force of single solenoid for 3D OCT imaging

Eun Jung Min; Jun Geun Shin; Yuri Kim; Byeong Ha Lee

doi:10.1117/12.874367

23 February 2011 Two dimensional scanning probe using off-axis magnetic force of single solenoid for 3D OCT imaging

Eun Jung Min, Jun Geun Shin, Yuri Kim, Byeong Ha Lee

Author Affiliations +

Proceedings Volume 7904, Three-Dimensional and Multidimensional Microscopy: Image Acquisition and Processing XVIII; 79041N (2011) https://doi.org/10.1117/12.874367
Event: SPIE BiOS, 2011, San Francisco, California, United States

Abstract

We propose a single piece optical fiber-based two-dimensional scanning hand-held probe suitable for three-dimensional optical coherence tomography. The probe consists of only a single piece of optical fiber loaded with a bead of ferromagnetic material, which acts as a vibrating cantilever. The fiber cantilever is two dimensionally actuated with a single miniaturized solenoid. For effective beam focusing, a fiber lens is formed at the end of the fiber. The inductance and input current of the solenoid were 100 μH and 216 mA, respectively. The iron-bead on the fiber is located at the off-axis of solenoid for two-dimensional scanning. Then, by modulating the input current to the solenoid, it was possible to mechanically oscillate the fiber cantilever in an elliptically spiral pattern. With the proposed probe, 2-dimensional scanning could be experimentally achieved in a rate of 4 s/vortex across a scanning area of approximately 30 mm², which could be controlled with the length of the fiber or/and the weight of the iron-bead. Three-dimensional tomographic image of a coin was successfully obtained with the spectral domain optical coherence tomography equipped with the proposed scanner. It is expected that the scheme of 2-dimentional scanning with a single actuator might be useful in various real-time imaging applications including OCT owing to the advantages of low cost, low power consumption, simple fabrication process and versatile design.

Citation Download Citation

Eun Jung Min, Jun Geun Shin, Yuri Kim, and Byeong Ha Lee "Two dimensional scanning probe using off-axis magnetic force of single solenoid for 3D OCT imaging", Proc. SPIE 7904, Three-Dimensional and Multidimensional Microscopy: Image Acquisition and Processing XVIII, 79041N (23 February 2011); https://doi.org/10.1117/12.874367

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE