Paper
1 April 2011 First steps towards traceability in scatterometry
Author Affiliations +
Proceedings Volume 7985, 27th European Mask and Lithography Conference; 79850G (2011) https://doi.org/10.1117/12.882848
Event: 27th European Mask and Lithography Conference, 2011, Dresden, Germany
Abstract
Scatterometry is a common technique for the characterization of nano-structured surfaces. The goal is to establish scatterometry as a traceable and absolute metrological method for dimensional measurements. Scatterometry is an indirect measuring method. There are three aspects to be investigated for a proper estimation of the measurement uncertainties. Firstly, the measured optical properties will have measurement uncertainties. The optimization theory provides well-proven algorithms to propagate the uncertainties of the input parameters to the output, using covariance or Monte Carlo methods. Secondly, it must be assured that the model represents the measurement object sufficiently well. Due to the large number of parameters it takes to model a real object, it is not possible to simultaneously determine all of them from the measured data. Therefore, a priori knowledge about reasonable values for certain model parameters and their associated variances is needed. Their impact on the uncertainties of the reconstructed parameters describing the nano-structured surface has to be considered too. Thirdly, there are assumptions in the model which are inherent properties of the mathematical methods used. The assumption that the structures are periodic over a sufficiently large area, i.e. the measurement field, is of the most importance. Line-edge or line-width roughness are obviously effects disturbing the periodicity and the corresponding uncertainty contribution can be derived by an analytical approach to estimate their influence on the diffracted intensities. In our example the latter contribution is the dominant one.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Frank Scholze, Bernd Bodermann, Hermann Groß, Akiko Kato, and Matthias Wurm "First steps towards traceability in scatterometry", Proc. SPIE 7985, 27th European Mask and Lithography Conference, 79850G (1 April 2011); https://doi.org/10.1117/12.882848
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Scatterometry

Diffraction

Extreme ultraviolet

Critical dimension metrology

Deep ultraviolet

Line width roughness

Mathematical modeling

Back to Top