Paper
21 June 2011 Some comments on GMTI false alarm rate
Author Affiliations +
Abstract
A typical Ground Moving Target Indicator (GMTI) radar specification includes the parameters Probability of Detection (PD) - typically on the order of 0.85, and False Alarm Rate (FAR) - typically on the order of 0.1 Hz. The PD is normally associated with a particular target 'size', such as Radar Cross Section (RCS) with perhaps some statistical description (e.g. Swerling number). However, the concept of FAR is embodied at a fundamental level in the detection process, which traditionally employs a Constant-FAR (CFAR) detector to set thresholds for initial decisions on whether a target is present or not. While useful, such a metric for radar specification and system comparison is not without some serious shortcomings. In particular, when comparing FAR across various radar systems, some degree of normalization needs to occur to account for perhaps swath width and scan rates. This in turn suggests some useful testing strategies.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. W. Doerry "Some comments on GMTI false alarm rate", Proc. SPIE 8021, Radar Sensor Technology XV, 80211P (21 June 2011); https://doi.org/10.1117/12.883097
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Radar

Target detection

Signal to noise ratio

Sensors

Antennas

Wind energy

Current controlled current source

Back to Top