Paper
13 September 2011 Investigations on crack development and crack growth in embedded solar cells
M. Sander, S. Dietrich, M. Pander, S. Schweizer, M. Ebert, J. Bagdahn
Author Affiliations +
Abstract
In recent investigations using various analysis methods it has been shown that mechanical or thermal loading of PV modules leads to mechanical stress in the module parts and especially in the encapsulated solar cells. Cracks in crystalline solar cells are a characteristic defect that is caused by mechanical stress. They can lead to efficiency losses and lifetime reduction of the modules. This paper presents two experiments for systematic investigation of crack initiation and crack growth under thermal and mechanical loading using electroluminescence. For this purpose PV modules and laminated test specimens on smaller scales were produced including different cell types and module layouts. They were exposed to thermal cycling and to mechanical loading derived from the international standard IEC 61215. Cracks were observed mainly at the beginning and the end of the busbars and along the busbars. The cracks were analyzed and evaluated statistically. The experimental results are compared to results from numerical simulations to understand the reasons for the crack initiation and the observed crack growth and to allow module design optimization to reduce the mechanical stress.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Sander, S. Dietrich, M. Pander, S. Schweizer, M. Ebert, and J. Bagdahn "Investigations on crack development and crack growth in embedded solar cells", Proc. SPIE 8112, Reliability of Photovoltaic Cells, Modules, Components, and Systems IV, 811209 (13 September 2011); https://doi.org/10.1117/12.893662
Lens.org Logo
CITATIONS
Cited by 21 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solar cells

Glasses

Electroluminescence

Numerical simulations

Polymers

Silicon

Manufacturing

Back to Top