Paper
21 September 2011 The design of beam shaping focused lens applied in solar energy concentration
Author Affiliations +
Abstract
In this paper, we proposed a new configuration of concentrator in solar PV system. A special optical system in the concentrator used in focusing sun light to solar cell is proposed, the system compose of an aspherical surface and a specific diffusing surface. The uniform-squared light pattern is obtained on the solar cell, the shape and size of light pattern can be modulated by the parameters of the diffusing surface. In order to decrease the weight of the lens, the concentrator in Fresnel lens type is built at last. Besides, the optical efficiencies formed by the aspherical concentrator and Fresnel concentrator are about 92% and 77%, the concentrations are about 720mW/mm2 and 640mW/mm2, and the acceptance angles are about 0.35° and 0.30°, respectively. The tolerances in assembling the component of the concentrator are also discussed in detail.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shih-Hsin Ma, Chi-Hung Lee, Yun-Parn Lee, Jih-Huah Wu, and Chun-Ming Tseng "The design of beam shaping focused lens applied in solar energy concentration", Proc. SPIE 8128, Current Developments in Lens Design and Optical Engineering XII; and Advances in Thin Film Coatings VII, 81280L (21 September 2011); https://doi.org/10.1117/12.892954
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solar cells

Solar concentrators

Solar energy

Tolerancing

Energy efficiency

Fresnel lenses

Assembly tolerances

RELATED CONTENT


Back to Top