Paper
7 November 2012 Continuous online partial discharge monitoring system
Zhihao Chen, Kim Teck Ng, Jun Hong Ng, James Yong Kwee Koh, Ju Teng Teo, Soon Huat Ng, Terence Shie Ping See, Weng Hoe Leong
Author Affiliations +
Proceedings Volume 8421, OFS2012 22nd International Conference on Optical Fiber Sensors; 8421A9 (2012) https://doi.org/10.1117/12.964980
Event: OFS2012 22nd International Conference on Optical Fiber Sensor, 2012, Beijing, China
Abstract
In this paper, we propose and demonstrate a new type of fiber optic sensor system for remote continuous monitoring and detection of partial discharge (PD) from power equipment. The sensing system uses an antenna which is connected to a vertical-cavity surface-emitting laser (VCSEL). The modulated light by the PD signal is transmitted through an optical fiber and measured remotely by an optical receiver. Laboratory experiments have shown that EMOptic sensor has high sensitivity and signal to noise ratio by comparing Electromagnetic (EM) sensor and other sensors. It provides a feasible remote PD monitoring technique for power equipments. A completed prototype sensing system based on this technique has been installed in a commercial building for field trial. The system can be accessed via internet anytime and anywhere.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhihao Chen, Kim Teck Ng, Jun Hong Ng, James Yong Kwee Koh, Ju Teng Teo, Soon Huat Ng, Terence Shie Ping See, and Weng Hoe Leong "Continuous online partial discharge monitoring system", Proc. SPIE 8421, OFS2012 22nd International Conference on Optical Fiber Sensors, 8421A9 (7 November 2012); https://doi.org/10.1117/12.964980
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Antennas

Sensing systems

Vertical cavity surface emitting lasers

Fiber optics sensors

Receivers

Signal to noise ratio

Back to Top