Paper
13 September 2012 Deformation dynamic response test of the active stressed lap based on real-time control system
Ying Li, Yi Zheng, Yinghu Wang
Author Affiliations +
Abstract
We have designed an active stressed lap and its control mode is that an computer sends control orders to the control system of the active stress lap, under windows operating system. The control mode has a shortage, which is a limit exists when we use the lap to complete an aspheric surface deformation task with a fast focal ratio, because windows system is not real-time. Therefore, we have designed a real-time deformation control system for the active stressed lap. The paper makes an introduction to the structure of the deformation control system of the active stressed lap. Secondly, gives a detailed presentation on the design of the test system from software and hardware two aspects .Finally, the paper makes a dynamic response test on the deformation control system of stressed lap, a stability test on the control system and an overall performance test.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying Li, Yi Zheng, and Yinghu Wang "Deformation dynamic response test of the active stressed lap based on real-time control system", Proc. SPIE 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II, 84504O (13 September 2012); https://doi.org/10.1117/12.924632
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Control systems

Control systems design

Mirrors

Astronomical imaging

Data acquisition

Aspheric lenses

Astronomy

RELATED CONTENT

Experiment study on friction drive
Proceedings of SPIE (September 29 2004)
LAMOST control system: past and future
Proceedings of SPIE (August 04 2010)
PAMELA progress report on a 0.5 m diam telescope...
Proceedings of SPIE (May 31 1994)
Introduction of a 2.5m telescope mount and its performance
Proceedings of SPIE (August 05 2010)
Design of MB sub-mirror handling manipulator for LAMOST
Proceedings of SPIE (July 23 2008)

Back to Top