Fabrication of the LSST monolithic primary-tertiary mirror

Michael T. Tuell; Hubert M. Martin; James H. Burge; Dean A. Ketelsen; Kevin Law; William J. Gressler; Chunyu Zhao

doi:10.1117/12.926403

13 September 2012 Fabrication of the LSST monolithic primary-tertiary mirror

Michael T. Tuell, Hubert M. Martin, James H. Burge, Dean A. Ketelsen, Kevin Law, William J. Gressler, Chunyu Zhao

Proceedings Volume 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II; 84504Q (2012) https://doi.org/10.1117/12.926403
Event: SPIE Astronomical Telescopes + Instrumentation, 2012, Amsterdam, Netherlands

Abstract

As previously reported (at the SPIE Astronomical Instrumentation conference of 2010 in San Diego¹), the Large Synoptic Survey Telescope (LSST) utilizes a three-mirror design in which the primary (M1) and tertiary (M3) mirrors are two concentric aspheric surfaces on one monolithic substrate. The substrate material is Ohara E6 borosilicate glass, in a honeycomb sandwich configuration, currently in production at The University of Arizona’s Steward Observatory Mirror Lab. We will provide an update to the status of the mirrors and metrology systems, which have advanced from concepts to hardware in the past two years. In addition to the normal requirements for smooth surfaces of the appropriate prescriptions, the alignment of the two surfaces must be accurately measured and controlled in the production lab, reducing the degrees of freedom needed to be controlled in the telescope. The surface specification is described as a structure function, related to seeing in excellent conditions. Both the pointing and centration of the two optical axes are important parameters, in addition to the axial spacing of the two vertices. This paper details the manufacturing process and metrology systems for each surface, including the alignment of the two surfaces. M1 is a hyperboloid and can utilize a standard Offner null corrector, whereas M3 is an oblate ellipsoid, so it has positive spherical aberration. The null corrector is a phase-etched computer-generated hologram (CGH) between the mirror surface and the center-of-curvature. Laser trackers are relied upon to measure the alignment and spacing as well as rough-surface metrology during looseabrasive grinding.

Citation Download Citation

Michael T. Tuell, Hubert M. Martin, James H. Burge, Dean A. Ketelsen, Kevin Law, William J. Gressler, and Chunyu Zhao "Fabrication of the LSST monolithic primary-tertiary mirror", Proc. SPIE 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II, 84504Q (13 September 2012); https://doi.org/10.1117/12.926403

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available