Paper
27 November 2012 Design of freeform LED lens with large light deflection angle for road lighting application
Shaoyun Yin, Zhongxun Wang, Xiuhui Sun, Liangping Xia, Hui Pang, Qiling Deng, Chunlei Du
Author Affiliations +
Abstract
The deflection of light of a single optical surface is limited by the Fresnel reflection loss and it is usually not enough to meet the requirements in large road width, tilt lighting LED lens design. This paper presents a method which greatly increases the light deflection angle of LED lens by combining a tilting aspherical surface with a freeform surface. Using this design method, a road lighting LED lens for length L= 30m, road width W=12m and tilt angle θ = 15 ° is designed and manufactured. The experimental results show that the overall road luminance uniformity is as high as 0.7. This design method greatly expand the light distributing capacity of the free-form surface LED lens, and it can be widely used in the design of LED road lighting lens and other illumination applications where large light deflection angle is needed.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shaoyun Yin, Zhongxun Wang, Xiuhui Sun, Liangping Xia, Hui Pang, Qiling Deng, and Chunlei Du "Design of freeform LED lens with large light deflection angle for road lighting application", Proc. SPIE 8560, LED and Display Technologies II, 85600E (27 November 2012); https://doi.org/10.1117/12.999767
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Roads

LED lighting

Light sources and illumination

Lens design

Reflection

Lamps

RELATED CONTENT


Back to Top