Paper
29 March 2013 In situ dissolution analysis of half-pitch line and space patterns at various resist platforms using high speed atomic force microscopy
Author Affiliations +
Abstract
Preliminary results of in situ analyses of dissolution of resist patterns of half-pitch (hp) lines and spaces (L/S) using high-speed atomic force microscopy are discussed. Initial experiments were conducted on an EUV-exposed 32 nm hp L/S pattern using a standard concentration (0.26 N) of tetramethylammonium hydroxide (TMAH) developer solution. This was done using a carbon nanofiber-based cantilever tip and after various tool enhancements and optimizations. Difference in the dissolution characteristics of various resist polymers such as polyhydroxystyrene (PHS)-based and hybrid (PHS-methacryl) resists was observed. These results are in agreement with the previously obtained results of measurements performed with 32 nm isolated line patterns on resist films developed with diluted developer solutions (1/20 of 0.26 N TMAH), where the PHS-based resist showed a uniformly dissolved, grain-like dissolution characteristic, while the hybrid resist exhibited resist swelling of the exposed resist film.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Julius Joseph Santillan and Toshiro Itani "In situ dissolution analysis of half-pitch line and space patterns at various resist platforms using high speed atomic force microscopy", Proc. SPIE 8682, Advances in Resist Materials and Processing Technology XXX, 86820I (29 March 2013); https://doi.org/10.1117/12.2011373
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D modeling

Image analysis

Standards development

3D image processing

Atomic force microscopy

Photoresist processing

Analytical research

RELATED CONTENT

Machine learning-based 3D resist model
Proceedings of SPIE (March 30 2017)
Tilted beam SEM, 3D metrology for industry
Proceedings of SPIE (March 26 2019)
In situ dissolution analysis of EUV resists
Proceedings of SPIE (April 15 2011)
Novel developers for positive tone EUV photoresists
Proceedings of SPIE (March 30 2007)

Back to Top