Electrical modeling of dielectric elastomer stack transducers

Henry Haus; Marc Matysek; Holger Moessinger; Klaus Flittner; Helmut F. Schlaak

doi:10.1117/12.2009959

9 April 2013 Electrical modeling of dielectric elastomer stack transducers

Henry Haus, Marc Matysek, Holger Moessinger, Klaus Flittner, Helmut F. Schlaak

Proceedings Volume 8687, Electroactive Polymer Actuators and Devices (EAPAD) 2013; 86871D (2013) https://doi.org/10.1117/12.2009959
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2013, San Diego, California, United States

Abstract

Performance of dielectric elastomer transducers (DEST) depends on mechanical and electrical parameters. For designing DEST it is therefore necessary to know the influences of these parameters on the overall performance. We show an electrical equivalent circuit valid for a transducer consisting of multiple layers and derive the electrical parameters of the circuit depending on transducers geometry and surface resistivity of the electrodes. This allows describing the DESTs dynamic behavior as a function of fabrication (layout, sheet and interconnection resistance), material (breakdown strength, permittivity) and driving (voltage) parameters. Using this electrical model transfer function and cut-off frequency are calculated, describing the influence of transducer capacitance, resistance and driving frequency on the achievable actuation deflection. Furthermore non ideal boundary effects influencing the capacitance value of the transducer are investigated by an electrostatic simulation and limits for presuming a simple plate capacitor model for calculating the transducer capacitance are derived. Results provide the plate capacitor model is a valid assumption for typical transducer configurations but for certain aspect ratios of electrode dimensions to dielectric thickness -- arising e.g. in the application of tactile interfaces -- the influence of boundary effects is to be considered.

Citation Download Citation

Henry Haus, Marc Matysek, Holger Moessinger, Klaus Flittner, and Helmut F. Schlaak "Electrical modeling of dielectric elastomer stack transducers", Proc. SPIE 8687, Electroactive Polymer Actuators and Devices (EAPAD) 2013, 86871D (9 April 2013); https://doi.org/10.1117/12.2009959

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available