Paper
18 November 2013 Pump and filtering optimization in Mamyshev regenerator
Andis Supe, Gil M. Fernandes, Nelson J. Muga, Armando N. Pinto, Mario F. S. Ferreira
Author Affiliations +
Proceedings Volume 8785, 8th Iberoamerican Optics Meeting and 11th Latin American Meeting on Optics, Lasers, and Applications; 8785CI (2013) https://doi.org/10.1117/12.2026288
Event: 8th Ibero American Optics Meeting/11th Latin American Meeting on Optics, Lasers, and Applications, 2013, Porto, Portugal
Abstract
In this paper we present results from the study of optical signal regeneration using Mamyshev type regenerator. We have performed the simulations and experimental characterization of regenerator by obtaining it`s transfer function and output optical signal to noise ratio measurements for two different filters - fixed and a tunable optical filter. Investigated regenerator setup consists of a high power erbium doped fiber amplifier, highly nonlinear fiber and a single stage optical filtering. Signal used for regeneration was an on-off keying return to zero code 40 Gbps pulse sequence. To find out optimum filter pass-band shift from signal`s central wavelength the regenerator`s transfer function was measured. Results show that highest output signal to noise ratio improvement for the fixed filter is at 0.6nm shift and amplifier output power set to 63 mW. While the tunable filter shift is 0.7nm at the 100 mW power level.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andis Supe, Gil M. Fernandes, Nelson J. Muga, Armando N. Pinto, and Mario F. S. Ferreira "Pump and filtering optimization in Mamyshev regenerator", Proc. SPIE 8785, 8th Iberoamerican Optics Meeting and 11th Latin American Meeting on Optics, Lasers, and Applications, 8785CI (18 November 2013); https://doi.org/10.1117/12.2026288
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical filters

Electronic filtering

Tunable filters

Signal to noise ratio

Interference (communication)

Scanning probe microscopy

Nonlinear filtering

Back to Top