Towards a deployable satellite gripper based on multisegment dielectric elastomer minimum energy structures

O. A. Araromi; I. Gavrilovich; J. Shintake; S. Rosset; H. R. Shea

doi:10.1117/12.2044667

8 March 2014 Towards a deployable satellite gripper based on multisegment dielectric elastomer minimum energy structures

O. A. Araromi, I. Gavrilovich, J. Shintake, S. Rosset, H. R. Shea

Author Affiliations +

Proceedings Volume 9056, Electroactive Polymer Actuators and Devices (EAPAD) 2014; 90562G (2014) https://doi.org/10.1117/12.2044667
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2014, San Diego, California, United States

Abstract

Dielectric Elastomer Actuators (DEAs) are an emerging actuation technology which are inherent lightweight and compliant in nature, enabling the development of unique and versatile devices, such as the Dielectric Elastomer Minimum Energy Structure (DEMES). We present the development of a multisegment DEMES actuator for use in a deployable microsatellite gripper. The satellite, called CleanSpace One, will demonstrate active debris removal (ADR) in space using a small cost effective system. The inherent flexibility and lightweight nature of the DEMES actuator enables space efficient storage (e.g. in a rolled configuration) of the gripper prior to deployment. Multisegment DEMES have multiple open sections and are an effective way of amplifying bending deformation. We present the evolution of our DEMES actuator design from initial concepts up until the final design, describing briefly the trade-offs associated with each method. We describe the optimization of our chosen design concept and characterize this design in terms on bending angle as a function of input voltage and gripping force. Prior to the characterization the actuator was stored and subsequently deployed from a rolled state, a capability made possible thanks to the fabrication methodology and materials used. A tip angle change of approximately 60° and a gripping force of 0.8 mN (for small deflections from the actuator tip) were achieved. The prototype actuators (approximately 10 cm in length) weigh a maximum of 0.65 g and are robust and mechanically resilient, demonstrating over 80,000 activation cycles.

Citation Download Citation

O. A. Araromi, I. Gavrilovich, J. Shintake, S. Rosset, and H. R. Shea "Towards a deployable satellite gripper based on multisegment dielectric elastomer minimum energy structures", Proc. SPIE 9056, Electroactive Polymer Actuators and Devices (EAPAD) 2014, 90562G (8 March 2014); https://doi.org/10.1117/12.2044667

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available