Design and simulation of PZT-based MEMS piezoelectric sensors

Doyle J. Baker; Casey Gonder; Frances Williams; Messaoud Bahoura; Oliver Myers

doi:10.1117/12.2045153

9 March 2014 Design and simulation of PZT-based MEMS piezoelectric sensors

Doyle J. Baker, Casey Gonder, Frances Williams, Messaoud Bahoura, Oliver Myers

Proceedings Volume 9057, Active and Passive Smart Structures and Integrated Systems 2014; 905719 (2014) https://doi.org/10.1117/12.2045153
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2014, San Diego, California, United States

Abstract

Devices with increased sensitivities are needed for various applications including the detection of chemical and biological agents. This paper presents the design of microelectromechanical systems (MEMS) devices that incorporate lead zirconate titanate (PZT) films in order to realize highly sensitive sensors. In this work, the piezoelectric properties of the PZT are exploited to produce sensors that perform optimally for mass sensing applications. The sensor is designed to operate as a thin-film bulk acoustic resonator (TFBAR) whereas a piezoelectric is sandwiched between electrodes and senses a change in mass by measuring a change in resonance frequency. Modeling of the TFBAR sensor, using finite element analysis software COMSOL, was performed to examine optimal device design parameters and is presented in this paper. The effect of the PZT thickness on device resonance is also presented. The piezoelectric properties of the PZT is based on its crystal structure, therefore, optimization of the PZT film growth parameters is also described in this work. A detailed description of the fabrication process flow developed based on the optimization of the device design and film growth is also given. The TFBAR sensor consists of 150 nm of PZT, 150nm of silicon dioxide, silicon substrate, titanium/platinum bottom electrodes, and aluminum top electrodes. The top electrodes are segmented to increase the sensitivity of the sensor. The resonance frequency of the device is 3.2 GHz.

Citation Download Citation

Doyle J. Baker, Casey Gonder, Frances Williams, Messaoud Bahoura, and Oliver Myers "Design and simulation of PZT-based MEMS piezoelectric sensors", Proc. SPIE 9057, Active and Passive Smart Structures and Integrated Systems 2014, 905719 (9 March 2014); https://doi.org/10.1117/12.2045153

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available