Paper
1 May 2014 Fabrication of high-density pitch adapters by laser ablation
F. Rey-García, C. Bao-Varela, E. Pérez, P. Rodríguez, A. Gallas, G. F. de la Fuente
Author Affiliations +
Abstract
High Energy Physics experiments make extensive use of micro-strip silicon sensors for tracking purposes. However, the high granularity of the modern detectors makes the connection between the segmented sensor channels and the readout electronics very complex. Enhancing the complexity, a direct connection is not possible in most of the cases due to the mismatch between the detector pad pitch and the electronics. A new method based on laser technology is presented for the fabrication of pitch adapters. In this new method the high-density metal traces are manufactured by means of laser ablation of the metal layer deposited on top of a substrate. Glass, Kapton and Silicon substrates were metal coated and tested for the fabrication of pitch adapters. Finally, a metal-on-glass prototype has been successfully manufactured and tested for electrical conductivity, bondability and metrology. Detectors have been assembled using this pitch adapters design and tested in particle beams at CERN.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. Rey-García, C. Bao-Varela, E. Pérez, P. Rodríguez, A. Gallas, and G. F. de la Fuente "Fabrication of high-density pitch adapters by laser ablation", Proc. SPIE 9133, Silicon Photonics and Photonic Integrated Circuits IV, 91330U (1 May 2014); https://doi.org/10.1117/12.2051502
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Laser ablation

Silicon

Metals

Manufacturing

Prototyping

Aluminum

RELATED CONTENT


Back to Top