Paper
20 February 2015 Capillary layer structure effect upon heat transfer in flat heat pipes
Silviu Sprinceana, Ioan Mihai, Marius Beniuga, Cornel Suciu
Author Affiliations +
Proceedings Volume 9258, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VII; 92581Q (2015) https://doi.org/10.1117/12.2070423
Event: Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies 2014, 2014, Constanta, Romania
Abstract
The research presented in this paper aimed to determine the maximum heat transfer a heat pipe can achieve. To that purpose the structure of the capillary layer which can be deposited on the walls of the heat pipe was investigated. For the analysis of different materials that can produce capillarity, the present study takes into account the optimal thickness needed for this layer so that the accumulated fluid volume determines a maximum heat transfer. Two materials that could be used to create a capillary layer for the heat pipes, were investigated, one formed by sintered copper granules (the same material by which the heat pipe is formed) and a synthetic material (cellulose sponge) which has high absorbing proprieties. In order to experimentally measure and visualize the surface characteristics for the considered capillary layers, laser profilometry was employed.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Silviu Sprinceana, Ioan Mihai, Marius Beniuga, and Cornel Suciu "Capillary layer structure effect upon heat transfer in flat heat pipes", Proc. SPIE 9258, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VII, 92581Q (20 February 2015); https://doi.org/10.1117/12.2070423
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Capillaries

Liquids

Copper

Optical spheres

Thermal effects

Visualization

3D modeling

Back to Top