A method for compensating the polarization aberration of projection optics in immersion lithography

Yue Jia; Yanqiu Li; Lihui Liu; Chunying Han; Xiaolin Liu

doi:10.1117/12.2069711

21 August 2014 A method for compensating the polarization aberration of projection optics in immersion lithography

Yue Jia, Yanqiu Li, Lihui Liu, Chunying Han, Xiaolin Liu

Author Affiliations +

Proceedings Volume 9283, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems; 928309 (2014) https://doi.org/10.1117/12.2069711
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China

Abstract

As the numerical aperture (NA) of 193nm immersion lithography projection optics (PO) increasing, polarization aberration (PA) leads to image quality degradation seriously. PA induced by large incident angle of light, film coatings and intrinsic birefringence of lens materials cannot be ignored. An effective method for PA compensation is to adjust lens position in PO. However, this method is complicated. Therefore, in this paper, an easy and feasible PA compensation method is proposed: for ArF lithographic PO with hyper NA (NA=1.2), which is designed by our laboratory, the PA-induced critical dimension error (CDE) can be effectively reduced by optimizing illumination source partial coherent factor σ_out. In addition, the basic idea of our method to suppress pattern placement error (PE) is to adopt anti-reflection (AR) multi-layers MgF₂/LaF₃/MgF₂ and calcium fluoride CaF₂ of [111] crystal axes. Our simulation results reveal that the proposed method can effectively and quantificationally compensate large PA in the optics. In particular, our method suppresses the dynamic range of CDE from -12.7nm ~ +4.3nm to -1.1nm ~ +1.2nm, while keeping PE at an acceptable level.

Citation Download Citation

Yue Jia, Yanqiu Li, Lihui Liu, Chunying Han, and Xiaolin Liu "A method for compensating the polarization aberration of projection optics in immersion lithography", Proc. SPIE 9283, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems, 928309 (21 August 2014); https://doi.org/10.1117/12.2069711

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE