Paper
27 August 2015 Physical basis for signal separation for remote sensing of multiple high energy radiation sources
J. Richards, V. K. Jain
Author Affiliations +
Abstract
In ‘radiation remote sensing’ multiple unknown high energy sources are generally involved. The detectors, upon sensing the corresponding mixed signals, must separate their contributions blindly for further analysis. A practical way to perform this separation could be through the Independent Component Analysis algorithm. However, the challenge faced is that theoretically there is no correlation among events, even those arising from the same source – thereby disabling meaningful ICA analysis. We overcome this hurdle by use of a thin barrier and by providing wide detector pulses. The radiation events that interact with the barrier take a longer time to reach the detector due to their increased path length. They also lose some energy, which makes them increasingly prone to capture in the barrier once they have scattered. These observations are confirmed through Monte-Carlo simulations upon Gamma-ray sources. Normalized crosscovariance up to 0.22 was found, but is actually controllable through appropriate selection of the detector shaping-pulse width. Experiments on a physical setup confirm these findings. Finally, the application of the ICA approach is demonstrated to demix, or separate, the individual contributions of the sources to the observed detector signals.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Richards and V. K. Jain "Physical basis for signal separation for remote sensing of multiple high energy radiation sources", Proc. SPIE 9595, Radiation Detectors: Systems and Applications XVI, 95950B (27 August 2015); https://doi.org/10.1117/12.2191526
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Signal detection

Independent component analysis

Remote sensing

Tungsten

Detection and tracking algorithms

Monte Carlo methods

Back to Top