Paper
28 September 2015 Simultaneous strain and temperature measurement with enhanced intrinsic sensitivity using etched polymer fibre Bragg gratings
Kishore Bhowmik, Gang-Ding Peng, Yanhua Luo, Eliathamby Ambikairajah, Ginu Rajan
Author Affiliations +
Proceedings Volume 9634, 24th International Conference on Optical Fibre Sensors; 963480 (2015) https://doi.org/10.1117/12.2194490
Event: International Conference on Optical Fibre Sensors (OFS24), 2015, Curitiba, Brazil
Abstract
A PMMA based single-mode polymer optical fibre is etched to different diameter and it is observed that etching can lead to change in the material properties of the fibre such as Young’s modulus and thermal expansion coefficient. This can play a vital role in improving the intrinsic sensing capabilities based on etched polymer optical fibre. Thus, exploiting the different strain and temperature sensitivities exhibited by the etched and un-etched polymer FBGs and by using an FBG array, strain and temperature can be measured simultaneously and also with very high sensitivity.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kishore Bhowmik, Gang-Ding Peng, Yanhua Luo, Eliathamby Ambikairajah, and Ginu Rajan "Simultaneous strain and temperature measurement with enhanced intrinsic sensitivity using etched polymer fibre Bragg gratings", Proc. SPIE 9634, 24th International Conference on Optical Fibre Sensors, 963480 (28 September 2015); https://doi.org/10.1117/12.2194490
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Polymers

Temperature metrology

Sensors

Etching

Optical fibers

Phase only filters

Back to Top