Fabrication of large area flexible PDMS waveguide sheets

Robert Green; George K. Knopf; Evgueni Bordatchev

doi:10.1117/12.2208789

14 March 2016 Fabrication of large area flexible PDMS waveguide sheets

Robert Green, George K. Knopf, Evgueni Bordatchev

Proceedings Volume 9759, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics IX; 97590U (2016) https://doi.org/10.1117/12.2208789
Event: SPIE OPTO, 2016, San Francisco, California, United States

Abstract

Soft-lithography techniques can be used to fabricate mechanically flexible polydimethylsiloxane (PDMS) optical waveguide sheets that act as large area light collectors (concentrators) and illuminators (diffusers). The performance and efficiency of these optical sheets is determined by the position and geometry of micro-optical features embedded in the sheet or imprinted on its surface, thickness and shape of the waveguide, core and cladding refractive indices, and wavelength of the incident light source. The critical design-for-manufacturability parameters are discussed and a scalable method of fabricating multi-layered PDMS optical waveguides is introduced. To illustrate the concepts a prototype waveguide sheet that acts a combined light collector and illumination panel is fabricated and tested. The region of the waveguide sheet that acts as the light collector consists of two superimposed PDMS layers with slightly different indices of refraction. The top layer is patterned with micro-lenses that focus the incident light rays onto the micro-wedge features that act as reflectors on the bottom of the second layer and, due to total internal reflection, redirect the light rays to the light diffuser region of the waveguide sheet. The bottom face of the diffuser PDMS layer is patterned with angled triangular wedge micro-features that project the light out of the waveguide sheet forming an illuminating pattern. The proposed fabrication technique utilizes precision machined polymethylmethacrylate (PMMA) moulds with negative patterned PDMS inserts that transfer the desired micro-optical features onto the moulded waveguide.

Citation Download Citation

Robert Green, George K. Knopf, and Evgueni Bordatchev "Fabrication of large area flexible PDMS waveguide sheets", Proc. SPIE 9759, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics IX, 97590U (14 March 2016); https://doi.org/10.1117/12.2208789

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available