9 February 2018 Design and validation of an open-source library of dynamic reference frames for research and education in optical tracking
Author Affiliations +
Abstract
Dynamic reference frames (DRFs) are a common component of modern surgical tracking systems; however, the limited number of commercially available DRFs poses a constraint in developing systems, especially for research and education. This work presents the design and validation of a large, open-source library of DRFs compatible with passive, single-face tracking systems, such as Polaris stereoscopic infrared trackers (NDI, Waterloo, Ontario). An algorithm was developed to create new DRF designs consistent with intra- and intertool design constraints and convert to computer-aided design (CAD) files suitable for three-dimensional printing. A library of 10 such groups, each with 6 to 10 DRFs, was produced and tracking performance was validated in comparison to a standard commercially available reference, including pivot calibration, fiducial registration error (FRE), and target registration error (TRE). Pivot tests showed calibration error (mean±std)=0.46±0.1  mm, indistinguishable from the reference. FRE was 0.15±0.03  mm, and TRE in a CT head phantom was 0.96±0.5  mm, both equivalent to the reference. The library of DRFs offers a useful resource for surgical navigation research and could be extended to other tracking systems and alternative design constraints.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE) 2329-4302/2018/$25.00 © 2018 SPIE
Alisa J. V. Brown, Ali Uneri, Tharindu S. De Silva, Amir Manbachi, and Jeffrey H. Siewerdsen "Design and validation of an open-source library of dynamic reference frames for research and education in optical tracking," Journal of Medical Imaging 5(2), 021215 (9 February 2018). https://doi.org/10.1117/1.JMI.5.2.021215
Received: 21 September 2017; Accepted: 12 January 2018; Published: 9 February 2018
Lens.org Logo
CITATIONS
Cited by 15 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Computer aided design

Calibration

3D printing

Error analysis

Optical tracking

Printing

Navigation systems

Back to Top