1 August 1983 Multiple Pulse Laser-Induced Bulk Damage In Crystalline And Fused Quartz At 1.064 And 0.532 õm
Larry D. Merkle, Michael Bass, Randall T. Swimm
Author Affiliations +
Abstract
We report bulk damage measurements on single crystal quartz and two types of fused silica under single and multiple pulse laser irradiation at 1.064 um and 0.532 um. Whereas the single pulse damage threshold varies little among the materials or with wavelength, the multiple pulse induced damage behavior depends strongly upon material and wavelength. Laser calorimetry and measurements of light scattered during irradiation give no evidence of change prior to the pulse on which macroscopic damage occurs. However, the distribution of the number of pulses needed to produce macroscopic damage as a function of intensity is indicative of an accumulation process in which some minimum intensity is required to initiate the accumulation of microscopic damage.
Larry D. Merkle, Michael Bass, and Randall T. Swimm "Multiple Pulse Laser-Induced Bulk Damage In Crystalline And Fused Quartz At 1.064 And 0.532 õm," Optical Engineering 22(4), 224405 (1 August 1983). https://doi.org/10.1117/12.7973135
Published: 1 August 1983
Lens.org Logo
CITATIONS
Cited by 34 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Laser crystals

Pulsed laser operation

Astatine

Bulk lasers

Fused quartz

Laser induced damage

RELATED CONTENT


Back to Top