1 January 2007 Comparison of tilted slit and tilted edge superresolution modulation transfer function techniques
Author Affiliations +
Abstract
With staring infrared sensors becoming more predominant, an increasing number of system Modulation Transfer Functions (MTFs) are being extracted from undersampled imagery. Contamination of the MTF measurement caused by aliasing must be avoided by using a superresolution technique. We compare differences in the utility of two of these techniques: the tilted edge technique, which is commonly used, and the tilted slit technique, which is not. While the tilted edge MTF measurement is taken for granted, the use of the tilted slit is both innovative and instructive. The differences between the two techniques are examined to determine their ability to successfully extract the MTF from an undersampled image without noise, with white noise, with fixed pattern noise, and with various angles of tilt. Ease of implementation is also considered. All things considered, the tilted edge technique is more easily accomplished and gives superior results. The tilted slit technique, however, gives valuable insight into the nature of aliasing in the real world. It is shown to be an excellent tool by which the difficult concept of aliasing may be easily illustrated.
©(2007) Society of Photo-Optical Instrumentation Engineers (SPIE)
Jeffrey T. Olson, Richard Lazarte Espinola, and Eddie L. Jacobs "Comparison of tilted slit and tilted edge superresolution modulation transfer function techniques," Optical Engineering 46(1), 016403 (1 January 2007). https://doi.org/10.1117/1.2430503
Published: 1 January 2007
Lens.org Logo
CITATIONS
Cited by 26 scholarly publications and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Fourier transforms

Super resolution

Sensors

Optical engineering

Contamination

Spatial frequencies

RELATED CONTENT


Back to Top