19 April 2013 Polyacrylate membranes for tunable liquid-filled microlenses
Wei Zhang, Hans Zappe, Andreas Seifert
Author Affiliations +
Abstract
We present the use of polyacrylate membranes for the fabrication of pneumatically actuated variable lenses. Whereas the most commonly used membrane material for tunable liquid-filled lenses is polydimethylsiloxane (PDMS), polyacrylate membranes have the advantages of high resistance to swelling in silicone oil and enhanced compatibility with a wide range of aqueous optical liquids. These features are quantitatively demonstrated by comparing the material properties and performance of PDMS and polyacrylate membrane lenses. The optical transparency of polyacrylate is more than 92%. The surface roughness is below 3.3 nm rms, and reversible elastic deformation could be demonstrated. Optical measurements show that the cutoff frequency of the modulation transfer function of polyacrylate lenses with different liquid fillings, using a reference contrast of 0.2, is more than 1.5 times larger than that of the same system assembled with PDMS membranes filled with water.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2013/$25.00 © 2013 SPIE
Wei Zhang, Hans Zappe, and Andreas Seifert "Polyacrylate membranes for tunable liquid-filled microlenses," Optical Engineering 52(4), 046601 (19 April 2013). https://doi.org/10.1117/1.OE.52.4.046601
Published: 19 April 2013
Lens.org Logo
CITATIONS
Cited by 15 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Lenses

Liquids

Microlens

Modulation transfer functions

Refractive index

Transmittance

RELATED CONTENT

Microlenses made with emulsion techniques
Proceedings of SPIE (August 18 2010)
Nonspherical optofluidic lenses
Proceedings of SPIE (February 14 2012)

Back to Top