13 November 2014 Fiber-optic sensor tip for measuring temperature and liquid refractive index
Min Li, Yi Liu, Shiliang Qu, Yan Li
Author Affiliations +
Abstract
A fiber sensor tip was proposed for measuring temperature and liquid refractive indices (RI). The sensor tip was fabricated by dipping a solidification ultraviolet (SU-8) photoresist onto the end surface of a simple-mode optical fiber. Then the SU-8 photoresist was cured by an ultraviolet source. A Fabry-Perot (FP) cavity was formed on the end faces of the SU-8 and optical fiber, and it showed a perfect FP interference spectrum. The temperature and liquid RI can be independently measured by monitoring the shift and the loss variation of interference peaks. The liquid RI sensitivity is 96.07232  dB/RIU in the RI range of 1.333 to 1.3714, and the temperature sensitivity is 0.38052  nm/°C within the temperature range from 25 to 55°C. The cross-sensitivities of temperature and liquid RI can be ignored. The sensor tip can be used in harsh environments, including strong acid, strong alkali, and violent vibration liquids, as cross-linking SU-8 has excellent chemical corrosion resistance capacity and mechanical strength.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2014/$25.00 © 2014 SPIE
Min Li, Yi Liu, Shiliang Qu, and Yan Li "Fiber-optic sensor tip for measuring temperature and liquid refractive index," Optical Engineering 53(11), 116110 (13 November 2014). https://doi.org/10.1117/1.OE.53.11.116110
Published: 13 November 2014
Lens.org Logo
CITATIONS
Cited by 16 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Liquids

Sensors

Fiber optics sensors

Temperature metrology

Optical fibers

Refractive index

Reflection

Back to Top