Development of a locomotion robot using deformable dielectric elastomer actuator without pre-stretch

H. Kumamoto; T. Hayashi; Y. Yonehara; M. Okui; T. Nakamura

doi:10.1117/12.2558422

22 April 2020 Development of a locomotion robot using deformable dielectric elastomer actuator without pre-stretch

H. Kumamoto, T. Hayashi, Y. Yonehara, M. Okui, T. Nakamura

Proceedings Volume 11375, Electroactive Polymer Actuators and Devices (EAPAD) XXII; 1137509 (2020) https://doi.org/10.1117/12.2558422
Event: SPIE Smart Structures + Nondestructive Evaluation, 2020, Online Only

Abstract

This study proposes the development of a locomotion robot using a deformable dielectric elastomer for actuation without pre-stretch. Electroactive polymers (EAPs) that are driven by electrical stimulation have recently garnered attention. Among EAPs, dielectric elastomer actuators (DEAs) are focused herein. DEAs have a structure wherein a dielectric is sandwiched between elastic electrodes. The performance of the DEA depends on the relative permittivity, Young's modulus, and the applicable voltage of the dielectric material. DEAs are usually used with pre-stretching, because of the material properties of the dielectric, which requires a large stress in the initial stage of extension, and the increase in the displacement of DEAs with the application of pre-stretch. However, because rigid frames are generally used for prestretching, there are few DEA applications that utilize their flexibility. Therefore, we focused on slide-ring materials (SRMs) as new dielectric materials. SRMs are polymer materials in which the cross-linking points move freely, and having excellent properties as dielectrics for DEA applications. Thus, pre-stretching is not required, and applications utilizing the flexibility of DEAs is possible. In previous research, a bending unit that did not require pre-stretching was manufactured by attaching non-stretchable tape to one side of the DEA using an SRM as the dielectric material. In addition, a locomotion robot with a bending unit was developed, and it was confirmed that the robot achieved locomotion because of a phase difference between the units. However, the basic characteristics of the bending unit and locomotion robot were not discussed. Therefore, in this research, we measured the frequency characteristics of the bending unit alone and demonstrated the locomotion of the robot.

Conference Presentation

Citation Download Citation

H. Kumamoto, T. Hayashi, Y. Yonehara, M. Okui, and T. Nakamura "Development of a locomotion robot using deformable dielectric elastomer actuator without pre-stretch", Proc. SPIE 11375, Electroactive Polymer Actuators and Devices (EAPAD) XXII, 1137509 (22 April 2020); https://doi.org/10.1117/12.2558422

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available