Presentation + Paper
17 September 2021 Assembly of confocal silicon pore optics mirror modules
Author Affiliations +
Abstract
The mirror modules composing Athena’s X-ray optics are made with the Silicon Pore Optics (SPO) technology. SPO is produced as stacks of 38 mirror plates, which are paired to form X-ray Optics Units (XOUs) following a modified Wolter I geometry. In the current design, a mirror module is composed of two confocal XOUs glued in between a pair of brackets that freeze the configuration and provide interfaces to the mirror structure. Mirror modules are assembled at the XPBF2 beamline of PTB at the synchrotron radiation facility BESSY II, using dedicated jigs. In this paper we present the latest developments regarding the assembly of confocal mirror modules for Athena with an emphasis on alignment tolerances and gluing accuracy.
Conference Presentation
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nicolas M. Barrière, Ljubiša Babić, Alex Bayerle, Luigi Castiglione, Maximilien J. Collon, Noë Eenkhoorn, David Girou, Ramses Günther, Enrico Hauser, Yvette Jenkins, Boris Landgraf, Laurens Keek, Ben Okma, Gregorio Mendoza Serano, Aniket Thete, Giuseppe Vacanti, Sjoerd Verhoeckx, Mark Vervest, Luc Voruz, Marco W. Beijersbergen, Marcos Bavdaz, Eric Wille, Ivo Ferreira, Sebastiaan Fransen, Mark Olde Riekerink, Jeroen Haneveld, Bart Schurink, Ronald Start, Coen van Baren, Evelyn Handick, Michael Krumrey, Giuseppe Valsecchi, Miranda Bradshaw, and Vadim Burwitz "Assembly of confocal silicon pore optics mirror modules", Proc. SPIE 11822, Optics for EUV, X-Ray, and Gamma-Ray Astronomy X, 1182208 (17 September 2021); https://doi.org/10.1117/12.2594171
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Tolerancing

Confocal microscopy

Ear

Mirror structures

Epoxies

X-ray optics

RELATED CONTENT


Back to Top