Paper
20 June 2024 Femtosecond laser induced direct patterning for liquid-metal repellent surface
Author Affiliations +
Abstract
Patterning liquid metal is a promising electrode material for soft electronics. In order to obtain controllable and fine liquid metal patterning, in this study, a superhydrophobic PDMS surface was fabricated using a femtosecond laser to adhere to liquid metal circuits selectively. A trapezoidal hierarchical micro/nanostructure was fabricated as the surface of PDMS was ablated by laser irradiation at a distance of 30 μm. As a result, the roughness of the surface increases, and the liquid metal adheres easily to the non-laser-treated area, but the liquid metal does not adhere to the laser-treated area. This method made various high-resolution liquid metal patterns with a line width of at least 40 μm. This method is fast, simple, inexpensive, does not require additional vacuum equipment, and is expected to be highly applicable, such as fabricating wearable devices, soft electronics.
© (2024) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chae Rin Yu, Jun Hee Jo, and Won Seok Chang "Femtosecond laser induced direct patterning for liquid-metal repellent surface", Proc. SPIE 13005, Laser + Photonics for Advanced Manufacturing, 130050X (20 June 2024); https://doi.org/10.1117/12.3021939
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Liquids

Femtosecond phenomena

Laser microstructuring

Optical lithography

Oxides

Electron beam lithography

RELATED CONTENT


Back to Top