Multilayered superconducting tunnel junctions for use as high-energy-resolution x-ray detectors

Edward D. Rippert; Shenian N. Song; John B. Ketterson; Melville P. Ulmer

doi:10.1117/12.48346

1 October 1991 Multilayered superconducting tunnel junctions for use as high-energy-resolution x-ray detectors

Edward D. Rippert, Shenian N. Song, John B. Ketterson, Melville P. Ulmer

Proceedings Volume 1549, EUV, X-Ray, and Gamma-Ray Instrumentation for Astronomy II; (1991) https://doi.org/10.1117/12.48346
Event: San Diego, '91, 1991, San Diego, CA, United States

Abstract

X-ray detectors based on superconducting tunnel junction technology are desirable due to their potential for higher energy resolution and greater charge carrier production than conventional semiconductor devices. Single junction devices fabricated by thermal or plasma oxidation of elemental, soft metal, superconductors have shown some promise, but tend to suffer from poor opacity, performance degradation upon thermal recycling, and unequal total charge collected for absorption of x rays in different layers due to differing tunneling characteristics of each layer. More complex designs, such as quasi-particle trapping systems and all refractory materials, can help with the unequal charge and thermal cycling problems, respectively. However, new problems in complexity of fabrication and short quasi-particle lifetimes arise. Other potential difficulties include resolution degradation due to trapping of quasi-particles at the photoabsorption site or near defects and tolerance of the devices to faults induced by their environment. The use of multilayers of superconducting tunnel junctions, consisting of tens to hundreds of identical tunnel junctions stacked on top of one another, as a design can address these problems. The multilayer can, in principle, be made as thick as desired in order to increase opacity, while the individual superconducting layers can be made very thin in order that the tunneling time of the quasi-particles be short compared with the quasi-particle lifetime for even refractory superconductors. In addition, the layer thinness helps to alleviate undesirable quasi-particle trapping. The inherent redundancy of junctions in a multilayered device allows for continued operation even after multiple single layer failures. The unique physical and technological possibilities of multilayered devices, such as resonant tunneling and built in preamplification, make them structures worthy of study even without the more pragmatic inducements described above.

Citation Download Citation

Edward D. Rippert, Shenian N. Song, John B. Ketterson, and Melville P. Ulmer "Multilayered superconducting tunnel junctions for use as high-energy-resolution x-ray detectors", Proc. SPIE 1549, EUV, X-Ray, and Gamma-Ray Instrumentation for Astronomy II, (1 October 1991); https://doi.org/10.1117/12.48346

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available