Paper
21 June 2000 Micro-electro-mechanical bandpass filters for signal processing by standard CMOS process
Tsungwei Huang, Peizen Chang, ChiYuan Lee, Fuyuan Xiao
Author Affiliations +
Abstract
This investigation fabricates a laminated-suspension microelectromechanical filter by a fully compatible CMOS process. Experimentally, due to the top metal layer begin used as the etch-resistant mask during the subsequent dry etching. Therefore, this study performs maskless etching with plasma and obtains excellent result including high selectivity and full release of the structure. Additionally, the MEMS filter can be driven by applying low-voltage of around 5 volts and a measured center frequency of around 13.1kHz and a quality factor of around 1871 were obtained for a single-comb resonator operate din air. The filter proposed herein has a monolithic integration capability with the relative electric circuits.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tsungwei Huang, Peizen Chang, ChiYuan Lee, and Fuyuan Xiao "Micro-electro-mechanical bandpass filters for signal processing by standard CMOS process", Proc. SPIE 3990, Smart Structures and Materials 2000: Smart Electronics and MEMS, (21 June 2000); https://doi.org/10.1117/12.388923
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Signal processing

Microelectromechanical systems

Filtering (signal processing)

Etching

Plasma etching

Resonators

RELATED CONTENT

3D-ICs created using oblique processing
Proceedings of SPIE (March 21 2016)
Micro- (and nano-) mechanical signal processors
Proceedings of SPIE (May 05 2010)
Silicon microhole array prepared by ICP
Proceedings of SPIE (December 30 2004)

Back to Top