Paper
29 November 2000 High volume manufacturing of polymer planar waveguides via UV embossing
Author Affiliations +
Abstract
A process is described here which is capable of creating very low cost single or multimode waveguides. To reuce the cost of manufacture to the lowest levels, one must move away from intensive individual processing steps such as wafer- based spin coating, lithography, and development. Here, a process is described which is inspired by the printing industry; especially the printing of raised features to form simple, low cost holograms typically used for product security. All efforts must be approached with a level of precision and engineering not typically required in the embossing industry. Precision resist masters of 12' dimension were created using commercially available photoresists and photomasks. High fidelity molds (and embossing tools) were made by replicating the master in both metal and elastomer. PET film was coated with an underclass layer which uniformly reproduced waveguide channel features. The filling process of waveguide cores proceeded through the coating of the channels followed by lamination of an overcoating. Finally, end face preparation was examined through die cutting, slitting, and laser cutting techniques.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul M. Ferm and Lawrence W. Shacklette "High volume manufacturing of polymer planar waveguides via UV embossing", Proc. SPIE 4106, Linear, Nonlinear, and Power-Limiting Organics, (29 November 2000); https://doi.org/10.1117/12.408492
Lens.org Logo
CITATIONS
Cited by 16 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Metals

Photomasks

Polymer multimode waveguides

Polymers

Manufacturing

Optics manufacturing

RELATED CONTENT


Back to Top