Paper
27 March 2002 Dislocation-engineered silicon light-emitting diodes
Manon A. Lourenco, Wei Lek Ng, Gousheng Shao, Russell M. Gwilliam, Kevin P. Homewood
Author Affiliations +
Abstract
Efficient silicon-based light emitting diodes have been fabricated using a recently developed approach - dislocation engineering. Crucially this technique uses entirely conventional ULSI processes. The devices were fabricated by conventional low energy boron implantation into silicon substrates followed by high temperature rapid thermal annealing. Strong silicon band edge luminescence was observed. Electroluminescence emissions with an efficiency greater than 2 X 10-4 at rom temperature were measured; the device lifetime was found to be approximately 18 microsecond(s) . The luminescence integrated intensity varied with the device fabrication conditions. In this paper we discuss the influence of processing conditions on the luminescence emissions.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Manon A. Lourenco, Wei Lek Ng, Gousheng Shao, Russell M. Gwilliam, and Kevin P. Homewood "Dislocation-engineered silicon light-emitting diodes", Proc. SPIE 4654, Silicon-based and Hybrid Optoelectronics IV, (27 March 2002); https://doi.org/10.1117/12.463848
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Electroluminescence

Luminescence

Temperature metrology

Light emitting diodes

Annealing

Boron

Back to Top