Precision shaping, assembly, and metrology of foil optics for x-ray reflection gratings

Craig R. Forest; Mark L. Schattenburg; Carl G. Chen; Ralf K. Heilmann; Paul T. Konkola; JoHanna Przbylowski; Yanxia Sun; Jenny You; Steven M. Kahn; Donald Golini

doi:10.1117/12.461477

11 March 2003 Precision shaping, assembly and metrology of foil optics for x-ray reflection gratings

Craig R. Forest, Mark L. Schattenburg, Carl G. Chen, Ralf K. Heilmann, Paul T. Konkola, JoHanna Przbylowski, Yanxia Sun, Jenny You, Steven M. Kahn, Donald Golini

Author Affiliations +

Proceedings Volume 4851, X-Ray and Gamma-Ray Telescopes and Instruments for Astronomy; (2003) https://doi.org/10.1117/12.461477
Event: Astronomical Telescopes and Instrumentation, 2002, Waikoloa, Hawai'i, United States

Abstract

The proposed Reflection Grating Spectrometer (RGS) on the Constellation-X mission is designed to provide high-resolution x-ray spectroscopy of astrophysical sources. Two types of reflection grating geometries have been proposed for the RGS. In-plane gratings have relatively low-density rulings (~500 lines/mm) with lines perpendicular to the plane of incidence, thus dispersing x-rays into the plane. This geometry is similar to the reflection grating spectrometer flown on the X-ray Multi-Mirror (XMM) mission. Off-plane, or conical, gratings require much higher density rulings (>5000 lines/mm) with lines parallel to the plane of incidence, thus dispersing x-rays perpendicular to the plane. Both types present unique challenges and advantages and are under intensive development. In both cases, however, grating flatness and assembly tolerances are driven by the mission's high spectral resolution goals and the relatively poor resolution of the Wolter foil optics of the Spectroscopy X-ray Telescope (SXT) that is used in conjunction with the RGS. In general, to achieve high spectral resolution, both geometries require lightweight grating substrates with arcsecond flatness and assembly tolerances. This implies sub-micron accuracy and precision which go well beyond that achieved with previous foil optic systems. Here we present a progress report of technology development for the precision shaping, assembly and metrology of the thin, flat grating substrates.

Citation Download Citation

Craig R. Forest, Mark L. Schattenburg, Carl G. Chen, Ralf K. Heilmann, Paul T. Konkola, JoHanna Przbylowski, Yanxia Sun, Jenny You, Steven M. Kahn, and Donald Golini "Precision shaping, assembly and metrology of foil optics for x-ray reflection gratings", Proc. SPIE 4851, X-Ray and Gamma-Ray Telescopes and Instruments for Astronomy, (11 March 2003); https://doi.org/10.1117/12.461477

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available