Paper
29 January 2004 Figure measurements of high-energy x-ray replicated optics
Author Affiliations +
Abstract
We are developing grazing incidence x-ray optics for a balloon-borne hard-x-ray telescope (HERO). The HERO mirror shells are fabricated using electroform-nickel replication off super-polished cylindrical mandrels. One of the sources for mirror resolution error is departure of the shell figure from prescription. We have modified a Vertical-scan Long Trace Profilometer (VLTP) in order to measure the figure of the inner surface of the HERO mirror shells for diameters as small as 74 mm. Metrology of the figure, the microroughness, tilt angle, the circularity for the shell mirrors and the mandrels, as well as alignment procedures are discussed. Comparison of metrology of the mandrel and the shells is presented together with results from x-ray tests.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mikhail V. Gubarev, Brian D. Ramsey, Thomas Kester, Chet O. Speegle, Darell Engelhaupt, and Greg Martin "Figure measurements of high-energy x-ray replicated optics", Proc. SPIE 5168, Optics for EUV, X-Ray, and Gamma-Ray Astronomy, (29 January 2004); https://doi.org/10.1117/12.508336
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

X-rays

Head

Prisms

Metrology

X-ray optics

Sensors

RELATED CONTENT

X-ray imaging glass micro-pore optics
Proceedings of SPIE (September 20 2007)
The optical demonstration of an x-ray interferometer
Proceedings of SPIE (October 07 2005)
Metrology for the development of high-energy x-ray optics
Proceedings of SPIE (September 15 2005)
Angular resolution measurements at SPring 8 of a hard x...
Proceedings of SPIE (October 01 2011)

Back to Top