Paper
2 April 2004 Manufacturing microdroplet generators with Laser-LIGA technique
Joeska Husny, Hengyi Jin, Erol C. Harvey, Justin J Cooper-White
Author Affiliations +
Abstract
Monodisperse micro-drops have been created successfully in T-shaped microchannels fabricated with the 'modified’ excimer laser-LIGA technique. This technique eliminates the surface wetting problems and the occurrence of a deeper ablation path which happened during the joining of different section of the microchannel with the dynamic laser ablation mode. The experimental study on the shear-induced drop formation from T-shaped microchannels shows that the drop size decreases with increasing shear and that a maximum drop productivity was observed depending on the value of the dispersed phase flowrate used.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joeska Husny, Hengyi Jin, Erol C. Harvey, and Justin J Cooper-White "Manufacturing microdroplet generators with Laser-LIGA technique", Proc. SPIE 5276, Device and Process Technologies for MEMS, Microelectronics, and Photonics III, (2 April 2004); https://doi.org/10.1117/12.522744
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Excimer lasers

Laser ablation

Microfluidics

Nickel

Fabrication

Copper

Polymers

Back to Top